SquashFS error after installation

These misses can have various causes: faulty storage components (solution: use memtest86 + to test your new storage) faulty DVD drive (solution: try different types of CD / DVD drives if possible) faulty data cable (workaround): exchange for a new one)

These errors can be caused by: Bad memory squashfs error modules (solution: use memtest86+ to monitor your memory) Bad DVD pushing (solution: try another correct CD/DVD drive if possible) Incorrect data collection (solution: replace it with a different one)

This obstruction is often caused either by a hardware failure of your hard drive (indicated by error 5, which is almost always considered an I/O error) or by a problem with the appearance of the drive you are using. . In rarer cases, this could also be a memory error, but this is unlikely in your company.

You can resolve this particular issue by registering it, taking a clean ISO image from this official Ubuntu website, and then verifying the MD5 report hash with the following command:

 md5sum /path/to/the/ubuntu.iso

You can now find the actual MD5 amounts for 16.04.1 below, intaken from this particular file. Make sure the effect of the command you run is exactly the same as in this file (or below).

c94d54942a2954cf852884d656224186 *ubuntu-16.04-desktop-amd64.iso
610c4a399df39a78866f9236b8c658da*ubuntu-16.04-desktop-i386.iso
23e97cd5d4145d4105fbf29878534049*ubuntu-16.04-server-amd64.img
23e97cd5d4145d4105fbf29878534049* ubuntu-16.04-server-amd64.iso
494c03028524dff2de5c41a800674692 *ubuntu-16.04-server-i386.img
494c03028524dff2de5c41a800674692* ubuntu-16.04-server-i386.iso
17643c29e3c4609818f26becf76d29a3*ubuntu-16.04.1-desktop-amd64.iso
9e4e30c37c99b4e029b4bfc2ee93eec2*ubuntu-16.04.1-desktop-i386.iso
d2d939ca0e65816790375f6826e4032f *ubuntu-16.04.1-server-amd64.img
d2d939ca0e65816790375f6826e4032f* ubuntu-16.04.1-server-amd64.iso
455206c599c25d6a576ba23ca906741a *ubuntu-16.04.1-server-i386.img
455206c599c25d6a576ba23ca906741a *ubuntu-16.04.1-server-i386.iso

After making sure that the MD5 hashes are generally EXACTLY what they are, you can start writing them to a fully working USB drive. You can look at a good Drive Flash that does the read-only check listed as part of the accepted answer to my question.

Once you’re sure the ISO and your flash drive are in the correct location, you can use the Ubuntu ISO tool, or just use dd to transfer the ISO to your drive for your drive.Dear.

retrieved August 23, 2016 6:25 pm.

32.6k

This can be caused by a number of issues (the most common being bad RAM, which you can test as sufficient reason to run memtest86), followed by connection issues (in this case with a card or USB cable) or possibly corrupted ISO

Temporary workarounds
Some users have reported that adding ide=nodma or acpi=off allowed them to get around this (which turned out to be bad callback modules). You might want to give it a try.

Successful start was achieved thanks to the addition of all_generic_ide to the product line Grub box for Live CD. Maybe

You add these lines to the general grub entry, either in the grub.conf file itself, or by entering the equivalent letter “e” in the grub menu and replacing it with Ctrl+x to boot:

ide=nodma acpi=off
More information about this issue in Grub can be found here: https://bugs.launchpad.net/wubi/+bug/ 608941

Once you’ve confirmed it’s an unreported hardware issue, you can Hold until the error< /a>

If something in this answer is still not clear, please comment and I can try to clarify.

Withdrawn 23 August. 16 at 23:07

33.8,000