Error message: Unable to read source file or disk

The recovery source is usually a location used to update advanced Windows features, enable various Windows features, or restore a corrupted Windows image. You can also use Windows Update or a range of files as a restore source.

A recovery source is a location used specifically to restore additional Windows benefits, enable additional Windows features, or overhaul a corrupted Windows image. You can use Windows Update or a set of files as repair credit.

A restore reason is a location that helps restore additional Windows features, enable additional Windows features, or repair a corrupted Windows image. You can use Windows Update or a number of documents as a recovery source.

The recovery source is the location chosen for restoring advanced Windows features, updating advanced Windows features, or restoring corrupted Windows images. You can support Windows Update or a range of files as a recovery source.

The recovery source is often a location used to restore advanced Windows features, enable various Windows features, or restore a malicious Windows image. You can use Windows Update or a range of files as a recovery source.

A recovery resource is a location used to restore advanced Windows features, deploy advanced Windows features, or restore a malicious Windows image. You can use Windows Update or several types of files as a recovery source.

Transaction source a is a persistent location for restoring additional Windows benefits, enabling additional Windows features, or restoring a corrupted Windows image.

Obtainable from Windows Update or use most files as a recovery source.

Select An Update Source To Restore

Windows is the default recovery source, but you can configure Group Policy to specify one or more network locations where my files are needed to restore core Windows functionality or restore a damaged working system. Windows Update

To Restore Optional Attributes And Restore Windows Images

How do I fix Windows bootloader?

Try to boot https://sourceeer.com device from a recovery drive or develop Windows 10 media;
Basically, click System Restore on the installation screen;
Then choose Troubleshoot -> Startup Repair and selectSelect the operating system whose bootloader you want to restore;


  1. Windows Update is often used by default if allowed by policy settings Some computers.

  2. You can set up Windows Update for a fallback recovery source. If you are using Windows Update as your central restore or backup source, it is important to make sure your firewall is configured to allow access to Windows Update.

Use Files From Specific Source

Instead of running Windows Update, you might get:

  • How do I repair Windows 10 with bootable USB?

    Download the Windows ISO image.
    Create a bootable USB drive or DVD.
    Boot from support and select “Fix your good computer”.
    Under Advanced Troubleshooting, select Startup Repair.

    Mounted Image

    You can deploy a Windows image mounted from a meaningful .wim file as a source for additional feature recovery and recovery of a brand new corrupted OS. Example: c:\mount\Windows. For more information on how to manually write a Windows image to a WIM file, see Capturing Disk Partition Images Using DISM.

  • Installing Windows

    You may want to run a Windows installation using a source to restore optional highlights by sharing the c:\windows folder on your network.

  • Folders side by side (SxS)

    As source files, you can also use a parallel Windows directory from a network share or external removable media, such as the Windows installation media. Example: z:\sources\SxS.

  • WIM file

    You may be able to get a Windows screenshot (.wim) of a network share to restore optional deliveries. You need to specify the Windows image directory in the .wim file of who you need help with, and use the nice Wim: prefix in the path to diagnose this file format. For example, to specify index 3 in an image named contoso.wim, type: Wim:\\network\images\contoso.wim:3.

  • Use Group Policy To Set The Most Common Restore Source

    You can use Group Policy to set your preferred restore source.

    Configure Group Policy For Features On Demand

    1. Open the collection rule editor. For example, on this computer running Windows 10, on the Start screen, type edit group policy, then select Edit Group Policy to open the Group Policy Editor.

    2. Click Computer Configuration, then Administrative Templates, then System, then double-click Specify Options to Fix and Enhance Optional Features.

      >

    3. Select the required configurations for the on-demand functions.

    Maintain Source Of Repair

    If you stop using Windows Update to maintain functionality and even auto-recovery after restoring source code, please see the related consumables recovery support guidelines.

    Technical Updates

    Now update all repair sources with the latest maintenance updates. If you are using an image from a component’s .wim file, you can help DISM maintain that image. For more information, see Mount and Modify a Windows Image Using DISM. If you’re using Windows Sharing on your local network, make sure your computer can access it so you can run Windows Update.

    Multilingual Images

    How do I repair Windows 10 with command prompt?

    Click Startup Repair.
    Click System Restore.
    Choose your username.
    Enter password.
    Type “cmd” into the main search field on the right.
    Basically, right-click Command Prompt and choose Run as administrator.
    Type sfc /scannow at the command prompt and press Enter.

    You mustWe include all relevant language packs in our recovery source files to maintain the image. If you plan to roll back a feature that includes all the language components required to install Windows, the installation will fail.

    You can download additional language packs after the showcase is restored.

  • 3 minutes of reading
  • RTM payload media only, regardless of whether the source is a WIM or a fully mounted Windows image. The upgrade uses old media versions of the deleted files that were excluded from the media, and the target system may need these files.
  • Make sure the source is fixed with our latest cumulative update. If this target operating system is patched to a higher level than the original, adding recovery features or operating systems may fail because the target operating system needs to update files that are not up to date in the source.
  • If you use the DISM command/restorehealth, you can specify a location-related command using the /Source parameter. For more information, see DISM operating system command-line options. From
  • Our Editors Recommend

    Do you like what you read?

    How do I fix Windows bootloader?

    Try booting your device from a recovery DVD or Windows 10 installation media;
    On this installation screen, click “System Restore”;
    Then select Troubleshoot -> Boot Repair” to select the operating system whose bootloader you want to try to restore;

    Sign up for our Tips & Tricks newsletter for expert advice on how to get the most out of family technology.

    This newsletter may contain advertising, special offers or affiliate links. By subscribing to the latest newsletter, you agree to the Terms of Service and Privacy Policy. You can unsubscribe from newsletters at any time.

    We work with many types of devices, including computers, smartphones, tablets, gaming systems, etc…

    To learn more

    Error Message: Unable To Read From Source File Volume

    How do I repair Windows 10 with command prompt?

    Click Startup Repair.
    Click System Restore.
    Choose a trusted username.
    Enter password.
    Type “cmd” into the main search field.
    Right-click Command Prompt and select “Run as administrator”.
    At the command prompt, type sfc /scannow and press Enter.

    “My internal or non-primary hard drive is full and slowing down badly My laptop does not work with Windows 10. Then I bought a new hard drive and wanted to download data from the PC to the new drive. So, maybe I’ll free up more space, but in some situations it still says “Unable to play due to source file or disc” and a specific file to play. Is there an alternative to solve the problem?”

    Many users today reported that when copying, deleting and/or possibly moving files from one location to another, they received the error message “Cannot view from source file or even from disk”. Example from PC to external hard drive/SD SD card, flash drive, etc. and vice versa under Windows 10/8/7. If this fact annoyed you, don’t worry! The therapy below may help you.

    Recover Data From Disk First

  • Recovery of deleted, partitioned and inaccessible data in various data loss situations.
  • Efficiently, cleanly and completely restore photos, music, audio and even email messages from any storage.
  • Restoring data from the recycle bin, harddisk, memory card, large disk, digital camera, and camcorder.
  • Hit a specific person. Select the drive where you lost data and click “Scanner”.

    Step 2 . 5. Use “Filter” or “Find” to find your lost files after the process is completed.

    Step 3. Select all the required information files and click Restore. Then move to another safe place to save them.

    Second, Format The Drive To Remove The “The Current File Or Drive Cannot Be Read” Error

    After finding all your files, you can try using the disk management tool to format a separate external hard drive, SD card, and/or possibly a USB drive to get rid of the “Cannot recover from source read computer” message. file or disk. constantly. It’s not very difficult and only requires simple steps!

    1. 1. Connect your device to your PC.
    2. How do I repair Windows 10 with bootable USB?

      Download the Windows ISO image.
      Create a bootable USB drive or DVD.
      Boot from media and select Repair your computer.
      Under Advanced Troubleshooting, select Startup Repair.

      How do I fix Windows bootloader?

      Try running the program from the recovery disc or Windows 10 installation media;
      On the screen of the installation computer, click “System Restore”;
      Then choose Troubleshoot -> Boot Repair and select eachfrom our operating systems, whose bootloader you want to try;